8 Year Exporter Calcium Hydroxide Production - HLF Series Fine Classifier – HCM

Technical advantages

Suspended Dispersion and Separation Technology

Good dispersion effect. The materials are broken up and separated in the separation bin and then enter the powder selection area.

 

Internal circulation collection technology

Using high-efficiency low-resistance classifiers and multi-channels distributed around the main body of the classifier, which effectively simplifies the process of the system, reduces the load and requirements of the subsequent dust collector, and reduces the one-time investment and installed capacity of the system.

 

Coarse powder secondary air separation technology

Install the secondary air separation device for coarse powder at the lower part of the coarse powder ash hopper of the classifier, to clean the coarse powder that falling into the ash hopper for a second time, so that the fine powder adhering to the coarse powder is sorted for higher powder selection efficiency.

 

Efficient wear-resistant and energy-saving technology

The powder selection efficiency is up to 90%, all wearing parts are made of wear-resistant materials and anti-wear treatment, long service life and low maintenance costs. There is an eddy current adjusting device in the rotor, which effectively reduces power loss and wear.

 

Horizontal Eddy Current Classification Technology

The powder selection airflow enters the powder feeding area through the rotor blades horizontally and tangentially to form a stable and uniform rotating vortex airflow. In the horizontal vortex powder selection area can achieve accurate classification.

Classifier Production Operation

Start up

Into the finished product warehouse elevator – finished product conveyor- residual wind pulse bottom valve spiral – classifier – fan – residual wind pulse fan – pulse controller – trommel screen – elevator – slaking system

 

Machine halt

Stop the slaking system – elevator – trommel screen – residual wind pulse fan – classifier – fan – residual wind pulse bottom valve spiral – finished product conveyor – into the finished product elevator – pulse controller

Operation and Maintenance

To ensure the classifier to run efficiently and safely for long-term, daily maintenance is necessary. User should formulate operating procedures and maintenance and repair systems in line with the actual conditions of the factory.

 

(1)Add sufficient lubricating oil to the fan bearings and classifier bearings regularly. At least add 2 times to the classifier bearings per shift (8 hours), and the amount of oil should no less than 250 grams per shift.

(2) The temperature of each bearing should be controlled within than 60℃. (140℉)

(3) Pay attention to the balance of the classifier. Stop and inspect if there are any abnormal vibration.

(4)Ensure that each heavy hammer flap valve is sensitive with good wind lock effect. Adjust the air volume of the residual wind pulse fan according to the water ratio of the slaking calcium hydroxide, avoid the system water vapor being congealed, avoid the calcium hydroxide powder being bonded to the rotor or pipeline.

(5) Try not to adjust the ventilation door of the fan for the fineness of calcium hydroxide, try to adjust the speed of mainshaft.

Precautions for Using Equipment

(1) The fineness adjustment generally uses the rotor speed adjustment, and try not to use the air volume adjustment as possible.

(2) The system should be well sealed, especially for the fine powder and coarse powder outlets, and the air lock device must be installed.

(3) The classifier has high efficiency and low cycle load.

(4) Strengthen operation management.

---

Product detail pictures:

---

Related Product Guide:

---

Our firm aims to operating faithfully, serving to all of our consumers , and working in new technology and new machine continually for 8 Year Exporter Calcium Hydroxide Production - HLF Series Fine Classifier – HCM, The product will supply to all over the world, such as: Zurich, Jersey, Montreal, We have been committed to meet all your needs and solve any technical problems you may encounter with your industrial components. Our exceptional products and vast knowledge of technology makes us the preferred choice for our customers.