1. Soyayyen kauri mai dacewa

Millar da ke tsaye yana aiki akan ƙa'idar gado gado. Kyakkyawan kayan gado shine abin da ake bukata don ci gaba da tsadar aikin injin ƙasa. Idan kayan abu ya yi kauri sosai, ingantaccen ƙarfin zai zama ƙasa; Idan kayan abu ya yi bakin ciki sosai, zai iya haifar da rawar jiki na niƙa. A farkon amfani da rumber sleeve da nika damfara Layer, da kauri daga cikin abin da aka sarrafa a kusan 130mm, wanda zai iya samar da madaidaicin abu mai tsayi da kuma sarrafa nauyin mai zuwa;

Lokacin amfani da daskararre injin hawa da kuma faranti mai laushi ya wuce naúrar aiki, da kauri daga kayan Layer ya kamata a riƙa ƙaruwa daidai, kuma kara fitowar awa; Yakamata suttura da filayen rufewa da rufin sa a mataki na daga baya ya kamata a sarrafa shi a cikin 150 ~ 16.arfin abu, saboda tsinkayen nika ba shi da kyau, kwanciyar hankali na Kayan abu ba shi da kyau, kuma abin mamaki na buga wasan fil na inji na inji zai faru. Sabili da haka, tsawo na ringing ringia ya kamata a daidaita shi cikin lokaci gwargwadon abin da ke tsaye a tsaye Morte roller sleeve da kuma farantin farantin kayan kunama.

A yayin aikin sarrafa na tsakiya, ana iya yin hukunci da canje-canje a cikin sigogi kamar matsi, zazzabi na yanzu, da kuma za a iya sarrafa guguwa ta hanyar Daidaita ciyar, nika matsin lamba, saurin iska, da sauransu, kuma suna yin daidaitattun kayan masarufi, ƙara kyakkyawan kayan masarufi, da kuma kayan aikin ƙasa ya zama bakin ciki; Rage matsin nika, kuma nika diski fadin ya zama mai kula, kuma daidai da stragging abu ya zama ƙari, kuma Layer na kayan ya zama mai kauri; Taurin iska yana ƙaruwa, Ranaina abu ya zama mai kauri. Circulation yana sa kayan kashin baya. Rage iska yana rage saurin ciki da kuma kayan abu na abu ya zama bakin ciki. Bugu da kari, cikakken danshi na cikin nika ya kamata a sarrafa shi a 2% zuwa 5%. Abubuwan kayan sun bushe sosai kuma suna da kyau sosai don samun kyawawan launuka kuma suna da wahala su zama abin tsayayyen abu Layer. A wannan lokacin, tsayin riƙe zobe ya kamata a ƙara yadda ya kamata, ya kamata a rage matsakaicin matsin mai, ko kuma ya kamata a rage matsin naga matsa. An fesa ruwa a ciki (2% ~ 3%) don rage kayan abin da ya dace da kayan aiki.

Idan kayan ya yi laushi sosai, tashar Battching, batsa, bawulen iska, da sauransu, wanda zai shafi lokacin Mill ɗin, ta hanyar da zai shafi lokacin tashar. Haɗawa abubuwan da ke sama, suna sarrafa madaidaicin abu mai kyau, suna riƙe da ɗan ƙaramin ƙasa mafi ƙarancin ƙasa, kuma haɓaka kyawawan abubuwa don haɓaka haɓaka da adana kuzari. A waje zazzabi na farkon-mataki ana sarrafawa a 95-100 ℃, wanda ya zama mai tabbata sosai, kuma banbancin matsin lamba gaba ɗaya kusa da 6000-6200pa, wanda yake da ƙarfi sosai; A waje zazzabi na na biyu shine ana sarrafa shi a kusa da 78-86 ℃, wanda ya zama mai tabbata sosai, kuma bambancin matsin lamba gaba ɗaya ne tsakanin 6800-7200pa. Barga da m.

2. Sarrafa iska mai kyau

Mill na tsaye shine injin da iska mai iska, wanda gero ya dogara da iska don kewaya da kayan sufuri, kuma yawan iska dole ne ya dace. Idan yawan iska bai isa ba, ba za a iya fitar da kayan masarufi ba cikin lokaci, abin da ya dace zai yi nauyi, girman baiwar zai zama babba, kuma fitarwa zai ragu; Idan girman iska ya yi yawa, kayan abu mai suna zai zama mai bakin ciki sosai, wanda zai shafi aikin masararriyar injin da ƙara yawan amfani da fan. Saboda haka, ƙaruwar iska dole ne ya dace da fitarwa. Za'a iya daidaita yawan iska a tsaye ta hanyar injin fan, buɗewar fan, da sauransu. Hcm inji (https://www.hc-mill.com/#page01) by email:hcmkt@hcmillng.com