Gabatarwa zuwa Dolomite
Dolomite wani nau'i ne na ma'adinai na carbonate, ciki har da ferroan-dolomite da mangan-dolomite.Dolomite shine babban bangaren ma'adinai na dolomite limestone.Dolomite mai tsabta fari ne, wasu na iya zama launin toka idan ya ƙunshi ƙarfe.
Aikace-aikace na dolomite
Ana iya amfani da Dolomite a cikin kayan gini, yumbu, gilashin, kayan da ba a so, sinadarai, noma, kare muhalli da filayen ceton makamashi.Ana iya amfani da Dolomite azaman kayan haɓakawa na asali, fashewar tanderu, takin calcium magnesium phosphate, da kayan siminti da masana'antar gilashi.
Dolomite nika tsari
Binciken sashi na albarkatun dolomite
| CaO | MgO | CO2 |
| 30.4% | 21.9% | 47.7% |
Lura: yakan ƙunshi ƙazanta irin su silicon, aluminum, iron da titanium
Dolomite foda yin na'ura samfurin zaɓi shirin
| Ƙayyadaddun samfur | Fine foda (80-400 raga) | Ultra-lafiya zurfin aiki (400-1250 raga) | Micro foda (1250-3250 raga) |
| Samfura | Raymond niƙa, niƙa a tsaye | Niƙa mai ƙoshin lafiya, injin niƙa mai kyau sosai | |
* Lura: zaɓi babban injin bisa ga fitarwa da buƙatun inganci
Analysis a kan nika model
1. HC Series nika Mill: low zuba jari kudin, high iya aiki, low makamashi amfani, tsayayye aiki, low amo.Rashin hasara: ƙananan ƙarfin guda ɗaya, ba manyan kayan aiki ba.
2. HLM Tsayayyen Mill: manyan kayan aiki, babban ƙarfin aiki, aiki mai tsayi.Hasara: mafi girma zuba jari kudin.
3. HCH Ultra-fine Mill: ƙananan farashin zuba jari, ƙananan amfani da makamashi, babban farashi-tasiri.Rashin hasara: ƙananan ƙarfin aiki, ana buƙatar kayan aiki da yawa don gina layin samarwa.
4.HLMX Ultra-fine Vertical Mill: iya samar da 1250 mesh ultra-fine foda, bayan sanye take da multilevel rarrabuwa tsarin, 2500 mesh micro foda za a iya samar.Kayan aiki yana da babban ƙarfin aiki, siffar samarwa mai kyau, wuri ne mai kyau don sarrafa foda mai inganci.Hasara: mafi girma zuba jari kudin.
Mataki na I: Murƙushe albarkatun ƙasa
Babban kayan dolomite yana murƙushe shi ta hanyar murƙushewa zuwa ƙimar abinci (15mm-50mm) wanda zai iya shiga injin niƙa.
Mataki na II: Niƙa
Ana aika ƙananan kayan dolomite da aka niƙa zuwa wurin ajiyar ajiya ta lif, sa'an nan kuma aika zuwa ɗakin nika na niƙa daidai da adadi ta hanyar mai ciyarwa don niƙa.
Mataki na III: Rarrabawa
Kayan niƙa ana ƙididdige su ta hanyar tsarin ƙididdigewa, kuma foda ɗin da bai cancanta ba ana ƙididdige shi ta hanyar rarrabawa kuma a mayar da shi zuwa babban injin don sake niƙa.
Mataki na V: Tarin samfuran da aka gama
Foda mai daidaitawa da kyau yana gudana ta cikin bututu tare da iskar gas kuma ya shiga mai tara ƙura don rabuwa da tarawa.Ana aika foda da aka gama tattara zuwa silo ɗin da aka gama ta na'urar isarwa ta tashar fitarwa, sannan a shirya ta tankin foda ko fakiti ta atomatik.
Misalan aikace-aikacen sarrafa foda na dolomite
Dolomite niƙa: injin nadi a tsaye, niƙa Raymond, niƙa mai kyau
Kayan aiki: Dolomite
Mafi kyawun: 325 raga D97
Yawan aiki: 8-10t / h
Tsarin kayan aiki: 1 saiti na HC1300
Cikakken saitin kayan aiki na Hongcheng yana da ƙaƙƙarfan tsari, ƙaramin bene kuma yana adana farashin shuka.Duk tsarin yana da cikakken iko ta atomatik, kuma ana iya ƙara tsarin kulawa mai nisa.Ma'aikata kawai suna buƙatar yin aiki a cikin ɗakin kulawa na tsakiya, wanda ke da sauƙi don aiki kuma yana adana farashin aiki.Ayyukan niƙa kuma yana da ƙarfi kuma fitarwa ya kai ga abin da ake tsammani.Duk ƙirar ƙira, jagorar shigarwa da ƙaddamar da aikin gabaɗaya kyauta ne.Tun lokacin da aka yi amfani da injin niƙa na Hongcheng, an inganta kayan aikinmu da ingancinmu, kuma mun gamsu sosai.
Lokacin aikawa: Oktoba-22-2021
