How to choose the grinding mill equipment in the electrolytic manganese powder workshop? The raw material for the production of electrolytic manganese is manganese ore powder. However, since most manganese ores are fine-grained or micro-fine-grained, and there are a considerable amount of high-phosphorus ore, high-iron ore and co-generated beneficial metals, it brings great difficulty to the mineral processing, and all of them need to be crushed and pulverized. Grind to finer to beneficiation or utilization. HCMilling(Guilin Hongcheng)‘s manganese ore mill is widely used in the grinding production line of the electrolytic manganese milling workshop. HCM’s HC1700 vertical pendulum Raymond mill, HLM series manganese carbonate vertical mill and other equipment have a high reputation in manganese ore enterprises all over the world. market share, the following two types of electrolytic manganese powder grinding mill equipment will be introduced to you.

HC1700 large vertical pendulum mill is a new generation of large-scale high-efficiency powder mill independently developed by HCMilling(Guilin Hongcheng). It draws lessons from the working principle of the pendulum mill and improves the swing mode of the pendulum mill. Under the condition of other parameters being the same, the centrifugal milling pressure is increased by nearly 35%, and the contact area between the milling roller and the milling ring is perfected. Improved crushing efficiency. The special adaptability design for manganese ore grinding mainly focuses on the following aspects: 1) Improve the swing mode and contact area, improve the crushing energy and efficiency; 2) Large-scale machine, high output, adapt to the requirements of large-scale production; 3) Optimize the transmission 4) Real-time monitoring and management of the feeding system and the working conditions of the main machine through PLC programming control technology; 5) Using cyclone and pulse dust collector to collect dust, no Dust spillage, more environmentally friendly. The equipment has high production capacity, high efficiency and high environmental protection, and can meet the needs of the increasingly large-scale industrial production of the manganese ore industry. At the same time, the energy consumption and equipment consumption per unit of product are 30% to 40% lower than other similar equipment.

The current production technology of the vertical mill is very mature, the processing mesh is between 0.25 ~ 0.026 mm (60 ~ 550 mesh), and the production capacity per unit time is between several tons to dozens of tons per hour. The HLM series of manganese ore vertical mills launched by HCMilling(Guilin Hongcheng) have matured operation cases in many domestic manganese ore processing enterprises. The advantages of using vertical mills in electrolytic manganese powder grinding mill workshop are reflected in the following aspects:

1. Environmental protection: The entire grinding process of the vertical mill is carried out in a dense space. The biggest difference between it and the traditional Raymond machine lies in the negative pressure dust suction production instead of the positive air pressure air supply production, thus effectively preventing the dust from flying out during the milling process. The air outlet uses a powerful PPCS-64 dust collection device, which can also absorb the dust from the discharge outlet.

2. Stable and high-yield: the vertical mill is currently mainly used in the processing of coal, calcium carbonate and other minerals in China, and the production technology is mature. In the production process, the failure rate is low, the equipment operation integrity rate can reach more than 98%, and the production efficiency is high. For example, HLM2000 can grind manganese powder with 200 mesh can reach 24 t/h, and HRM2400 can grind manganese carbonate with 80 mesh can reach 60t/h.

3. Low labor cost: The vertical mill has high production efficiency and requires fewer operators, so the labor cost is relatively low. In addition, the vertical mill has high reliability and good stability, and generally requires little maintenance, and does not require many fitters for maintenance.

4. Low material consumption and energy consumption: The vertical mill has high reliability and good stability, which directly reduces the amount of maintenance and repairs, thus directly reducing the cost of maintenance materials. When the roller sleeve is worn to a certain extent, it can also be turned over and reused to prolong the service life of the roller sleeve.

To sum up, there are mainly two kinds of equipment for grinding in electrolytic manganese powder workshop: new Raymond mill and vertical mill, and users can choose according to production capacity and investment budget. The initial investment of the vertical mill is higher than that of the new Raymond mill, but the operating cost is lower. If you want to know more about the quotation of the milling equipment in the electrolytic manganese milling workshop, or the EPC general contracting service for the milling in the electrolytic manganese grinding mill workshop , 

lease contact mkt@hcmilling.com or call at +86-773-3568321, HCM will tailor for you the most suitable grinding mill program based on your needs, more details please check www.hcmilling.com. Our selection engineer will plan scientific equipment configuration for you and quote for you.