xinwen

Iindaba

Spodumene Production Line HC Raymond Pendulum Mill

 umgca wokuvelisa i-spodumene

I-Spodumene Production Line HC Raymond Pendulum Mill, i-imeyile:hcmkt@hcmilling.com 

Ungasetyenziselwa ntoni oomatshini umgca wokuvelisa i-spodumene?Yintoni ukusetyenziswa kwe-spodumene?Yimalini iumgca wokuvelisa i-spodumene?Kule nqaku siza kukwazisa indlela yokukhetha umgca wokuvelisa i-spodumene efanelekileyo.

 

I-Spodumene ingokwenkqubo ye-monoclinic, kwaye iikristali zihlala zi-granular okanye ipleyiti.Ikwi grey-white, grey-green, purple or yellow, etc., ukuqina kwayo yi 6.5-7, kwaye ingxinano yi 3.03-3.22g/cm³.Njengempahla ekrwada yeemveliso zeekhemikhali ze-lithium, isetyenziswa ngokubanzi kwiikhemikhali ze-lithium, iiglasi kunye namashishini e-ceramic.

 

I-Spodumene isetyenziswa ikakhulu kumacandelo amabini.Eyokuqala isetyenziselwa ukukhupha i-lithium, i-lithium esetyenziswa kwishishini nakwimiba eyahlukeneyo ikhutshwe kwi-spodumene.Okwesibini kukwenza i-ceramic casserole, i-ceramic casserole eyenziwe nge-spodumene inozinzo oluhle kunye nokumelana nokushisa, i-spodumene casserole inokufudumeza ngokuthe ngqo kwi-microwave.

 

Ukugaya i-80-400 ye-mesh spodumene, sincoma i-HCRaymond Pendulum Mill.I-HC Pendulum Raymond Mill yinto entsha kunye nophuculo olusekelwe kwimizila yemveli.Inenani lophando oluzimeleyo kunye nophuhliso lobuchwephesha obunelungelo elilodwa lomenzi wechiza.Phakathi kwabo, i-HC1700 Raymond Pendulum Mill yolona hlobo luthandwayo, izikhombisi zayo zobugcisa ziphuculwe kakhulu xa zithelekiswa nohlobo lwe-R, luyimveliso ephezulu kunye neyonga amandla okugcina izixhobo zokusila.Inokulungelelaniswa okunamandla kwizinto eziphathekayo, ukucolwa kwemveliso egqityiweyo kunokulungelelaniswa phakathi kwe-80-400 mesh, kwaye imveliso ingaba yi-30% -40% ephezulu kuneyemveli ye-Raymond mill.

 

I-HC enkulu yokusila i-pendulum

Inani lee-roller zokugaya: 5-6

Ukuveliswa kwemveliso egqityiweyo: 3-55t / h

Ukulunga kwemveliso: 38-180μm

 

Iingcali zethu ziya kubonelela ngokwezifisoumgca wokuvelisa i-spodumene ukuqinisekisa ukuba ufumana iziphumo ozifunayo zokusila.

Nceda usazise:

1.Izinto zakho.

2.I-fineness efunekayo(umnatha okanye u-μm) kunye nesivuno (t/h).

I-imeyile:hcmkt@hcmilling.com


Ixesha lokuposa: Jun-02-2022